Posts Tagged ‘stuck’

If you’ve ever had a disc get stuck in the Olevia BDP-110 Blu-ray player, you know how frustrating this can be!  The player locks up and can only be re-started by unplugging and then plugging in the A.C. cord.  Even then the player boots up and locks again without ejecting your disc. Here’s how to manually eject the disc.

Warning:  This article is for informative purposes only!  We take no responsibility for any damage that you may cause or incur if you try this yourself.

First, and most importantly, make sure the A.C. line cord is unplugged! Remove the eight (8) small phillips bolts that hold on the top cover of the player. Tip the cover up at a 45 degree angle and remove it. ( The yellow screwdriver in the photo is pointing to the eject hole)

null

We found that it was easier to reach the eject hole by tipping the player assembly out. There’s 4 small brass bolts and a red SATA-type cable holding the blu-ray player unit in place.

Here we plainly see the eject hole, faintly marked “E”.  Straighten out a paperclip to about a 3″ length and insert it in the hole.  As you push it in you’ll feel a small wheel inside the player turning the eject mechanism.  You may have to do this several times. As you push the paper clip in, you’ll slowly see the eject door opening.  Eventually you’ll be able to pull the tray out and retrieve your missing disc!

Warning:  This article is for informative purposes only!  We take no responsibility for any damage that you may cause or incur if you try this yourself.